SONY TA-V606
¥ 48,000 (released in 1997)
Commentary
An AV amplifier equipped with digital cinema sound technology.
With a 5.1 channel input, you can enjoy 5.1 channel surround sound with a DVD player with a Dolby digital processor, or 3-1 stereo sound with a 5.1 channel input.
It is equipped with a cinema studio mode using digital cinema surround, which is Sony's original surround technology.
Cinema Studio Mode allows you to enjoy the sound effects of three different types of Sony Pictures Entertainment studios.
A dynamic 5-amp system with front L/R, center and rear L/R amplifiers is adopted, enabling more powerful surround playback.
A large transformer with a wrapped core is used for the power supply.
In conventional EI core transformers, E-type and I-type magnetic steel sheets are individually laminated and then combined (welded or bonded) to form the core. However, by adopting a wrap-packed structure in which E-type and I-type magnetic steel sheets are stacked alternately, there is no part that is cut in a fault in the magnetic path, reducing leakage of magnetic flux.
The electrolytic capacitor is also equipped with a large-capacity and large-size type for pure audio that is carefully selected through repeated trial listening not only in electrical characteristics but also in acoustic characteristics.
The heat sink uses a high-rigidity large heat sink made of extruded aluminum that is tuned to suppress harmful fin squeal. The heat sink itself is also firmly fixed to the chassis body to reduce vibration structurally.
The legs are equipped with an eccentric insulator.
The eccentric insulator has a structure with a screw hole to avoid the center position, and by changing the phase of vibration, it is canceled and transmission to the chassis is reduced.
Equipped with base boost function, you can increase the impact of low sound with one touch.
It has a direct pass switch that allows you to bypass surround, tone control and base boost circuits as needed.
The SA-IF70 can be used as a rear speaker with a dedicated terminal that can be combined with the optional wireless speaker SA-IF70.
There are 2 color variations of gold and titanium gray.
Wireless remote control with learning function is included.
.jpg)
.jpg)
.jpg)
.jpg)
Model Rating
| Type | AV amplifier | ||
| Maximum Practical Output (EIAJ, 6 Ω) | Front : 150W + 150W Center : 150W Rear : 150W + 150W |
||
| Total harmonic distortion rate (20 Hz to 20 kHz) | Front : 0.09% or Less (at 6 Ω load, 90W + 90W output) | ||
| Frequency characteristic | Line : 10 Hz to 50 kHz + 1-3 dB (when direct path is ON, analog system) | ||
| Signal-to-noise ratio (A network) | Line : 82 dB (when direct path is ON) | ||
| Surround Mode | 11 program 11 mode (refer to the surround mode list below) | ||
| Dolby Pro Logic Input Balance | Auto | ||
| Tone control | Front Bass : ± 10 dB (100 Hz) Front Treble : ± 10 dB (10 kHz) |
||
| Input of video equipment (audio & video) | Route 4 | ||
| Video equipment (audio & video) output | Route 2 | ||
| Video monitor output | Route 1 | ||
| S-image input | Route 2 | ||
| S Video Output | Route 1 | ||
| S video monitor output | Route 1 | ||
| Audio input | Phono MM : 1 system Line : Route 3 5.1 ch input : 1 system |
||
| Audio Out | Rec out : 1 system Subwoofer : 1 line Headphone : 1 system |
||
| AC outlet | Power switch interlock : 2 systems | ||
| Pwer | 100 VAC, 50Hz/60Hz | ||
| Power consumption | 195W | ||
| External dimensions | Width 430x Height 155x Depth 360 mm | ||
| Weight | Approx. 10.8 kg | ||
| Attachment | Remote Controller with Learning Function RM-P501 | ||
Surround mode on the TA-V606
|
|||
.jpg)