SONY TA-N330ES

Commentary

ES series stereo power amplifier that uses G chassis.

Uses G chassis, which was born from the design concept of no resonance and no vibration.

The power supply section is equipped with a large toroidal transformer.
The S. T. D. power supply system is adopted in which the rectifier circuits for the A-class stage and the power stage are separated and independent.

We apply velvet-like electrostatic hair transplantation to the vibration proof platform to fix the power capacitor.

Equipped with a volume and two input selectors.

It can also be used as a monaural amplifier by switching the switch.

Model Rating

Type	Stereo power amplifier
Rated output	stereo: 150W + 150W (4 Ω, 20 Hz to 20 kHz) 125W + 125W (6 Ω, 20 Hz to 20 kHz) 110W + 110W (8 Ω, 20 Hz to 20 kHz) mono: 300W (8 Ω, 1 kHz)
Output bandwidth	5 Hz to 50 kHz (55W output, 0.05% harmonic distortion rate, 8 Ω)
Harmonic distortion factor	0.004% (10W output, 8 Ω)
Cross modulation distortion factor	0.001% (at rated output, 8 Ω, 60 hz : 7 khz = 4 : 1)
Frequency characteristic	5 Hz ~ 200 kHz + 0 -3dB
Signal-to-noise ratio	120dB
Number of input terminals	Route 2
Input Sensitivity / Impedance	180mV/20k Ω
Damping factor	100 (8 Ω, 1 kHz)
Slew rate	120 V / μ sec 250 V / μ sec (inside)
Pwer	100 VAC, 50Hz/60Hz
Power consumption	230W
External dimensions	Width 470x Height 150x Depth 365 mm Side Wood Removal : Width 430 mm
Weight	13.2kg