SONY TA-F2
¥ 32,000 (around 1976)
Commentary
A pre-main amplifier developed by applying a new power supply circuit obtained in the development process of the TA-F3.
It employs a multi-power filter system with a total of six decoupling filters between each amplifier, reducing crosstalk in the low frequency range.
The power amplifier uses a pure complimentary service all-stage direct-coupled circuit and a dual-transistor differential amplifier that combines two transistors with the same characteristics into a single package.
0.01W ~ 100W direct reading power meter is installed.
Equipped with a muting switch.
Model Rating
Type | Stereo pre-main amplifier |
Effective output (both channel operation) | 1 kHz : 27W + 27W (8 Ω) 20 Hz to 20 kHz : 24W + 24W (8 Ω) |
Dynamic Power (IHF) | 100W (8 Ω) |
Output Band Characteristics (IHF, 8 Ω) | 10 Hz to 30 kHz |
Harmonic distortion factor | 0.1% or Less (Effective Output) 0.05% or Less (at 1W Output) |
Intermodulation distortion factor (60 hz : 7 khz = 4 : 1) | 0.1% or Less (Effective Output) 0.05% or Less (at 1W Output) |
Damping factor (1 kHz, 8 Ω) | 25 or more |
Phono maximum allowable input (1 kHz) | 120mV |
Tone control (Turnover frequency in parentheses) |
Bass (250 Hz) : 100 Hz ± 9 dB Treble (4 kHz) : 10 kHz ± 6.5 dB |
Filter | Low : 30 Hz or less, 6dB/oct. |
Loudness control | 50Hz:+8.8dB 10kHz:+2.5dB |
Power consumption | 65W |
External dimensions | Width 410x Height 145x Depth 290 mm |
Weight | 5.9kg |
Sold Separately | Rack Handle AH-4 (1 set, ¥ 2,500) |