SONY TA-AV590

Commentary

AV amplifier with DSP for effect and rear signal.

The effect component and rear signal are digitally processed by DSP to realize realistic sound field reproduction.

Surround mode includes Dolby Pro-Logic Surround with Auto Input Balance, Theater, Hall and Simulated Surround as well as fine tuning of the effect level.

The power amplifier section is equipped with a 5-ch amplifier, and the power supply section uses an S. T. D. power supply.

For system expansion, it is equipped with a monaural output, center output, and front L/R pre-output, which are ideal for connecting devices such as a subwoofer.

There are 2 variations, black and titanium gray.

It comes with a wireless remote control with a learning function. By storing the signal in this remote control, it is possible to operate other AV equipment with infrared remote control.

Model Rating

Type	AV amplifier
Amplifier Unit
Maximum practical power (EIAJ, 6 Ω)	Front : 145W + 145W Center : 145W Rear : 40W + 40W
Effective power	Front : 75W + 75W (20 hz ~ 20 khz, 6 Ω)
Frequency characteristic	Line system : 10 Hz to 50 kHz + 1-3dB (front, equalizer / surround OFF)
Harmonic distortion factor	0.04% or Less (front, 6 Ω load, 75W output)
Surround Section
Mode	Dolby / Hall / Theater / Simulated
Delay time	20.0 ms fixed (Dolby surround)
Effect level	6 levels (theater, fly, simulated)
Input balance	Auto
Tone Control Unit
Front	Bass : ± 10 dB (100 Hz) Treble : ± 10 dB (10 kHz)
<General>
Pwer	100 VAC, 50Hz/60Hz
Power consumption	190W
External dimensions	Width 430x Height 135x Depth 360 mm
Weight	Approx. 10.0 kg
Attachment	Remote Controller with Learning Function RM-P590