SONY TA-AV570

Commentary

AV amplifier with built-in Dolby Pro Logic Surround and 5 ch amplifier.

In addition to the Dolby Pro Logic with Auto Input Balance, it is equipped with three surround modes : Hall, Matrix and Simulate.

Equipped with 5 ch power amplifier of front L/R, center and rear L/R.

For input / output, two video systems are installed with an input Line 5, and one audio system is installed with an input Line 5.
The video system is equipped with an S video input / output terminal.

The Input Selector is a simple up / down method that takes into account the operation interval of the video equipment. It also uses a large function display to confirm the selected input source and surround mode.

It is equipped with a mix mode that can output any combination of video and audio sources.

Two pre-out terminals out terminals for center output.

System remote control is included.

Center output is available in Dolby mode.

There are 2 color variations of titanium gray and black.

Model Rating

Type	AV amplifier
Amplifier Unit
Maximum Practical Output (EIAJ, 6 Ω)	Front : 70W + 70W Center : 30W Rear : 30W + 30W
Speaker compatible impedance	6 Ω ~ 16 Ω (front, center, rear)
Frequency characteristic	10 Hz ~ 50 kHz + 1-3 dB (when surround is OFF)
Surround Section
Mode	Dolby / Hall / Matrix / Simulate
Delay time	20 ms fixed (Dolby surround)
Input balance	Auto
Tone Control Unit
Front	Bass : ± 10 dB (100 Hz) Treble : ± 10 dB (10 kHz)
<General>
Pwer	100 VAC, 50Hz/60Hz
Power consumption	140W
External dimensions	Width 430x Height 135x Depth 360 mm
Weight	9.8kg
Attachment	System Remote Controller RM-U451