SONY TA-4650
¥ 84,800 (around 1976)
Commentary
Stereo pre-main amplifier using V-FET.
All stages are directly connected pure complimentary service SEPPOCL circuit and DC-amplifier configuration using four Nch and Pch V-FETs.
An equalizer stage with two LEC transistor and V-FET for small signal is adopted.
The flat amplifier uses a DC amplifier that extends the band to DC in order to achieve faithful waveform transmission.
Equipped with a muting switch.
Model Rating
| Type | Stereo pre-main amplifier | ||||
| Effective output (both channel operation) | 1 kHz : 35W + 35W (8 Ω) 20 Hz to 20 kHz : 40W + 40W (8 Ω) |
||||
| Dynamic Power (IHF, 8 Ω) | 100W | ||||
| Output Band Characteristics (IHF, 8 Ω) | 5 Hz to 70 kHz | ||||
| Harmonic distortion factor | 0.1% or Less (Effective Output) 0.05% or Less (at 1W Output) |
||||
| Intermodulation distortion factor (60 hz : 7 khz = 4 : 1) | 0.1% or Less (Effective Output) 0.05% or Less (at 1W Output) |
||||
| Damping factor (1 kHz, 8 Ω) | 45 or more | ||||
| Phono maximum allowable input (1 kHz) | 2 systems 300 mv each | ||||
| Tone control (Turnover frequency in parentheses) |
|
||||
| Filter | Low : 35 Hz or less, 6dB/oct. High : 6 kHz or higher, 6dB/oct. |
||||
| Loudness control | 50Hz:+10dB 10kHz:+3dB |
||||
| Power consumption | 110W | ||||
| External dimensions | Width 430x Height 170x Depth 325 mm | ||||
| Weight | 11.5kg | ||||
| Sold Separately | Sidewood TAC-15 (1 Set, ¥ 2,800) |