SANSUI CD-5A
¥ 22,900 (around 1971)
Commentary
3-way electronic crossover divider.
The crossover frequency can be selected from a total of eight stages, four between low and middle range and four between middle and high range, by switching two rotary switches.
As a result, it can be used as both a 2-way system that divides the low and middle frequencies and a 3-way system that drives the low, middle and high frequencies with their respective power amplifiers.
The cutoff characteristics can be switched between 2 levels of 6dB/oct. and 12dB/oct. depending on the characteristics and preference of the speaker. Both high and low frequencies can be switched separately.
Each of the left and right mid-range and high-range outputs has its own level control.
Equipped with a direct terminal, it is possible to compare and listen to the electronic crossover method and the standard method (network).
Model Rating
Type | 2ch/3ch Channel divider |
Rated output | 2V |
Total harmonic distortion factor | 0.3% |
Hum and noise | -70dB |
Constant loss | 3dB |
Input impedance | 100k Ω |
Load impedance | 10k Ω |
Frequency switching | 200 Hz, 340 Hz, 560 Hz, 900 Hz, 2-way-High, 2-way-Low 2.5 kHz, 3.6 kHz, 5 kHz, 7 kHz |
Frequency error | + / - 20 per cent |
Crossover cut-off characteristic | 6dB/oct, 12dB/oct (high / low independently switchable) |
Crossover decay | 3dB |
External dimensions | Width 166x Height 127x Depth 278 mm |
Weight | 2.7kg |