Pioneer PIM-16KT
¥ 1,720 (around 1974)
Commentary
This product is a kit of PIM-16A, a 16 cm full-range speaker with a mechanical 2-way system.
The parts are identical to those of the PIM-16A.
It is a mechanical 2-way system, and the cone paper for the tweeter is connected to the center of the cone for the woofer by the corrugation edge. Of the cone for the woofer, there is a window on the back side of the cone for the tweeter. This acts as a mechanical filter. Both the tweeter and the woofer vibrate simultaneously at low sound, but only the tweeter is driven by the filter at high sound.
This realizes 2-way drive with one voice coil.
Repair parts were sold separately as a set of voice coil, cone paper, center cap, damper, gasket, adhesive, damping agent and tube adapter.
Model Rating
Type | Mechanical 2-way 16 cm speaker kit |
Kit part | Frame Corn paper Damper Yoke cap Nameplate Voice coil Tube adapter Bond Dumping agent Center Cap Magnetic circuit Service screw Solder Cross Recessed Oval Countersunk Head Machine Screw Gasket |
Voice coil impedance | 8 Ω |
Lowest resonance frequency (fo) | 70 Hz to 85 Hz |
Frequency characteristic | Fo ~ 16 kHz |
Max Input | 10W |
Rated input | 5W |
Output sound pressure level | 90dB/W |
Total flux | 34,500maxwell |
Magnetic flux density | 11,000gauss |
Equivalent mass | 4.9g |
Baffle opening | 130 mm φ |
Mounting Dimensions | 155 mm φ |
External dimensions | Diameter 165x Depth 97 mm |
Weight | 0.95kg |
Sold Separately | Repair Parts Kit PP-16KT (¥ 580) |