Pioneer S-71X
¥ 106,000 (around 1964)
Commentary
This is a separate stereo with an auto mechanism in the player.
Receiver / player part
The player is equipped with functions such as auto return and auto cut.
The tuner section of the receiver has a limiter circuit, which can eliminate noise.
Speaker part
A 3-way speaker is used for the speaker section.
A 25 cm cone woofer is installed in the low range and a 16 cm cone squaker is installed in the middle range.
In addition, a 6.5 cm cone type tweeter is installed in the high range.
Model Rating
| Type | Stereo system | |
| <Player Part> | ||
| Drive motor | 4-pole synchronous motor | |
| Turntable | 25cm | |
| Cartridge | MM Type | |
| Needle tip | 0.7 mil diamond needle | |
| Tone arm | Static balanced type pipe arm | |
| Frequency characteristic | 20 Hz to 21 kHz | |
| Accessory function | Auto return Autocut |
|
| Receiver Section | ||
| Receiving frequency | FM | 76 MHz to 90 MHz |
| AM(MW) | 535 kHz to 1,605 kHz | |
| Maximum power output | 17W+17W | |
| Distortionless output | 11W+11W | |
| Accessory circuit | FM-AFC Switching Method FM-MPX Stereo indicator Loudness control Headphone port |
|
| Vacuum tube used | 14 balls with 10 stones | |
| Maximum Power Consumption | 130VA | |
| Speaker Unit | ||
| Method | 3-way, 3-speaker floor type | |
| Units Used | For low band : 25 cm cone type For Medium Range : 16 cm cone type For high pass : 6.5 cm cone type |
|
| Frequency characteristic | 40 Hz to 16 kHz | |
| <General> | ||
| External dimensions | Width 1,440x Height 780x Depth 480 mm | |
| Weight | 65kg | |