Pioneer S-42X
¥ 95,000 (around 1964)
Commentary
Separate stereo with FM multi-circuit added to S-42.
Receiver / player part
Equipped with FM multi-circuit, it can receive FM stereo broadcast transmission.
The player part is designed with 3 speeds.
The drive motor is equipped with a 4-pole synchronous motor.
The cabinet has a walnut oil finish.
Speaker part
A 2-way speaker is used for the speaker section.
It has a 25 cm cone woofer in the low range and a 6x10cm elliptical cone tweeter in the high range.
Model Rating
Type | Stereo system | |
<Player Part> | ||
Drive motor | 3-speed 4-pole synchronous motor | |
Turntable | 25 cm Iron Plate Pressed | |
Cartridge | MM Type | |
Needle tip | 0.7 mil diamond needle | |
Needle pressure | 3.5g | |
Tone arm | Static balanced type pipe arm | |
Frequency characteristic | 20 Hz to 20 kHz | |
Receiver Section | ||
Receiving frequency | FM | 80 MHz to 108 MHz |
AM(MW) | 535 kHz to 1,605 kHz | |
SW | 3.8 mhz to 12 mhz | |
Maximum power output | 7W+7W | |
Distortionless output | 4W+4W | |
Accessory circuit | FM-AFC Switching Method FM-MPX Loudness control |
|
Vacuum tube used | 17-ball 9-stone configuration | |
Maximum Power Consumption | 120VA | |
Speaker Unit | ||
Method | 2-way, 2-speaker floor type | |
Units Used | For low band : 25 cm cone type For High Pass : 6x10cm Oval Cone Type |
|
Frequency characteristic | 48 Hz to 16 kHz | |
<General> | ||
External dimensions | Width 1,350x Height 660x Depth 360 mm | |
Weight | 46kg |