Audio Database


Pioneer S-UK3
60,000yen( It is 1 set in two sets, August, 1993 release)

The speaker system of UK series with which Mr. John Bamford who was writing as an audio critic developed by joining Pioneer High Fidelity LTD. in Britain.
The design is carried out based on the concept of keeping a signal path simple short as much as possible.

The 14cm cone type Woofer is carried in low-pass. The fiber which selected the needle-leaf tree from Northern Europe carefully has adopted thick tough pulp as the cone paper of this unit.
This unit is suppressing an occurrence of the peek of a high region and acquiring a smooth high region damping characteristics, and is connected direct, without using a network.

The 2.5cm soft dome shape tweeter is carried in the high region.
The catenary curve from which high rigidity is acquired in the shape of a soft dome shape is adopted.

The enclosure is made into the 4th page round structure, and it is made a baffle board with 20mm, and it is 19mm at the shell plate.

The large-sized gilding input terminal is adopted.

Rating of a mode
Scheme 2 way and 2 speaker bass-reflex scheme -
Bookshelf type
Using unit For low-pass: 14cm cone type
For high regions: 2.5cm dome shape
Impedance 6ohm
Play frequency band 40Hz - 35000Hz
Output sound pressure level 88dB/W/m
The maximum input 90W(EIAJ)
Cross over frequency 5000Hz
Dimensions Width 207x height 370x depth of 284mm
Weight 6.8kg
Adjunct OFC speaker cable adjunct (3.0x2m)
Option Speaker table lamp CP-303 (an It is 1 set in two sets, 25,000yen)