|
| Pioneer S-LH3 |
|
| 45,000yen(one set, the June, 1997 release) |
The linear scheme 2 way speaker system which adopted
the vertical twin scheme.
The cone equivalent to the TAD adoption which
performed the aging treatment and fully performed tone-quality tuning, and the
magnet which raised flux density are used for the newly developed 15cm linear
power unit.
Low-pass play capacity is heightened by employing this Woofer full time
two times, employing the merit of a small caliber efficiently.
The horn tweeter adopted as the high region is uniting an aperture size
with a Woofer, and is improving the continuity of directional characteristics,
energy phase relation, etc.
Furthermore, the play of sound excellent in the
retroaction is put into practice and pursued with the efficient design rear
compression driver developed taking advantage of the design know-how of TAD.
A vertical twin scheme is adopted as a unit layout. Since sound is
virtually emitted from on a horn axis, the merit of a coaxial speaker is taken
in and a feeling of an orientation and a presence are raised.
Attenuator
loading in which 3 position variable is possible.
Frank grain tone 6th
page finish
The gilding input terminal corresponding to a banana plug.
|
| Scheme |
2 ways, 3 speaker bass-reflex scheme, and a
bookshelf type
- Magnetic-shield design (EIAJ) |
| Using unit |
For low-pass: 15cm cone type x2
For high
regions: 2.5cm compression driver
+ AFAST-SZ horn |
| Impedance |
6ohm |
| Play frequency band |
35Hz - 35000Hz |
| Output sound pressure level |
88dB/W/m |
| The maximum input |
160W(EIAJ) |
| Cross over frequency |
3000Hz |
| Dimensions |
Width 236x height 517x depth of 309mm
|
| Weight |
10.4kg |
| Adjunct |
OFC speaker cable (2.5m) |
| Option |
Exclusive speaker table lamp CP-LH3 (25,000yen, It is 1 set in two sets)
|
|
|
|