|66,000yen( It is 1 set in two sets, 1994 release)
The speaker system which adopted the trapezoid
The 14cm cone type Woofer is carried in low-pass.
the moderate internal loss and the cone attenuated smoothly without lengthening
a band by force is adopted, and the crossover of a tweeter is enabled by
coinciding the energetics of an inband, and an axis top property by a full range
which さ r Is not, without using a network element.
The 2.5cm soft dome
shape tweeter is carried in the high region.
The magnetic circuit of high
flux density which has a stops in a magnetic gap is adopted, and the
modification of coupling of the improvement in a power linearity and a filter is
realized by filling this up with a magnetic fluid.
Moreover, rigid high
catenary form is adopted in the shape of a dome shape.
connects only a capacitor to a tweeter and is carrying out the loss by a network
element to adoption while it makes the Woofer side the direct-drive of a network
The trapezoid structure to which the slant of one side of a baffle
board was carried out is used for an enclosure.
Since the minimum baffle
side can be constituted from carrying out like this near each speaker unit, the
secondary reflection of the sound by diffraction phenomena is decreased.
Furthermore, by the baffle of an inequality side quadrilateral, the
resonance point of a baffle side can also be distributed and the level of the
secondary radiation by unnecessary vibration can also be reduced.
the stationary wave is decreased by reducing the parallel side in an enclosure.
For the material of this enclosure, the beautiful material of sound was
selected carefully out of MDF material, and the black specular surface of the
piano tone is made.
The vice type gilding terminal is adopted as a
||2 way and 2 speaker bass-reflex scheme -
||For low-pass: 14cm cone type
regions: 2.5cm dome shape
|Play frequency band
||40Hz - 35000Hz
|Output sound pressure level
|The maximum input
||Width 250x height 408x depth of 267mm