Audio Database

The

Pioneer S-C3
30,000yen( It is 1 set in two sets, 1994 release)

Description
 
The speaker system which adopted the Woofer direct-drive by a network less technology.

The 14cm cone type Woofer is carried in low-pass.
The crossover of a tweeter is enabled by having had the moderate internal loss, and having adopted the cone attenuated smoothly without lengthening a band by force, and also coinciding the energetics of an inband, and an axis top property by a full range, without using a network element.

The 2.5cm soft dome shape tweeter is carried in the high region.
The magnetic circuit of high flux density which has a stops in a magnetic gap is adopted, and the modification of coupling of the improvement in a power linearity and a filter is realized by filling this up with a magnetic fluid.
Moreover, the catenary-shaped diaphragm which used the product made from silk is adopted as a diaphragm.

A network connects only a capacitor to a tweeter and is carrying out the loss by a network element to adoption while it makes the Woofer side the direct-drive of a network less.

The enclosure serves as 6th page makeup finish of the brown maple handle.
High-density MDF material is used for a baffle.


Rating of a mode
Scheme 2 ways, 2 speaker bass-reflex scheme, and a bookshelf type
Using unit For low-pass: 14cm cone type
For high regions: 2.5cm dome shape
Impedance 6ohm
Play frequency band 40Hz - 30000Hz
Output sound pressure level 87dB/W/m
The maximum input 80W(EIAJ)
Dimensions Width 225x height 408x depth of 247mm
Weight 6.0kg