Audio Database


Pioneer PL-25E
30,000yen(around the 1972 time)

The record player equipped with S character type tone arm or abundant attachment.

The high-sensitivity S character type static balance type tone arm which included the peculiar anti skating organization in the tone arm is adopted, and various cartridges are supported.
The tick mark of a Direct-reading type can perform a coordination of a stylus force.

It has composition which combined the polyurethane belt which does not have the 30cm aluminum alloy die-casting turntable which gave 4 pole synchronous motor and the dynamic balance, and aged deterioration in an actuator.

The low capacity code is adopted as output code, and the damping in a line is suppressed.

The large-sized insulator developed original with Pioneer is adopted for the measure against a howling.

The velocity switching lever has adopted the lever lock scheme which does not operate in the state of power-switch off.

The arm lifter of an oil dumping type is being interlocked with the start lever.

PC-15 which is man-month type cartridge is attached to the cartridge.

The checker who can adjust an overhang easily at the time of a cartridge switching sticks.


Rating of a mode
Form Record player
Motor 4 pole synchronous type
Turntable The product made from diameter aluminum alloy die-casting of 30cm (weight of 1kg)
Rotation unevenness 0.08% or less (WRMS)
SN ratio 48dB or more
Rotational frequency 33 1 / 3 or 45rpm
Cartridge man-month type (PC-15)
Tone arm Static balance type S character type pipe arm
An attached organization Power-switch interlock arm
Elevation organization
Velocity switching lever lock
Magnetic-repulsion type anti skating organization
Overhang checker
Large-sized insulator
Dimensions Width 484x height 185x depth of 417mm
Weight 7.5kg