Pioneer PD-6070

Commentary

A CD player developed with high sound quality and non-resonance technology similar to the high-end model.

In order to improve the phase difference of the photodetector that occurs when optical signals are converted into electrical signals and to generate high-precision RF signals, we have adopted an Accu-focus system.

A digital filter is used in the digital circuit to obtain low-distortion audio characteristics without a low-pass filter.

Uses a magnet clamp type disk stabilizer that fixes the disk by the attraction force of the magnet.
Because the disk vibration is non-contact, it is not directly transmitted to the pickup or other circuits, enabling stable signal reading.

It adopts a floating structure in which the optical system mechanism is lifted from the chassis, so that resonance is completely eliminated.
In addition, the ballast base that lowers the center of gravity of the mechanical chassis rather than the mechanism support part realizes stable signal reading.

Uses a honeycomb chassis with honeycomb ribs on the chassis bottom plate.

Equipped with an auto program edit function convenient for tape editing.

It uses a pause program function that allows you to insert a pause during the program of a song.

Equipped with a power on start function that enables timer start.

Model Rating

Type	CD Player
Pick-up	Three beam semiconductor laser system
D/A Conversion Format	16-bit straight line
Frequency Response (EIAJ)	4 Hz to 20 kHz ± 0.5 dB
Signal-to-noise ratio (EIAJ)	95 dB or more
Dynamic Range (EIAJ)	93 dB or more
Wow & flutter (EIAJ)	Measurement limit (± 0.001% W. PEAK) or less
Total Harmonic Distortion Factor (EIAJ)	Not more than 0.005%
Output Voltage (EIAJ)	2 V ± 0.5 V
Number of channels	2 channels (stereo)
Pwer	100 VAC, 50Hz/60Hz
Power consumption	10W
External dimensions	Width 420x Height 86x Depth 315 mm
Weight	3.8kg
Attachment	Remote control