Audio Database

CT-570
Commentary

Stereo cassette deck in pursuit of operability.

With an emphasis on the sense of operation, large self-illuminated operation buttons are concentrated in the center of the front panel. The LED lights on each button with a light touch and the driving mode can be confirmed by light.

A dedicated electronic servo motor is used to drive the head base to achieve an extremely quiet vertical motion while reducing damage to the head. The ejection is also a motor drive system that uses the rotational power of this motor to drive the head base.

It is equipped with functions such as a PMS function that allows you to repeat one song (music repeat) or find the beginning of the song you want to listen to, and an auto rewind / memory play function linked to the counter.
It is also equipped with REC mute and timer standby mechanism.

Equipped with the Dolby HX System, which is compatible with a wide range of music sources and greatly improves the high-frequency characteristics of Chikara Dainyu.

Uses Sendust head for the head.

The drive train uses a DC servo motor for the capstan and a DC torque motor for the reel.

Model Rating
Type Cassette deck
Heads Recording : Sendust head x1
Erase : 1 ferrite head
Motor For constant speed drive : DC servo motor
For Reel Drive : DC Motor
Quick winding speed Within 90 seconds (at C-60)
Uneven rotation 0.04% or less (WRMS)
Frequency characteristic
Normal tape (-20dB recording) :
Chrome tape (-20dB recording) :
(0 dB recording) :
Metal Tape (-20dB recording) :
(0 dB recording) :
20 Hz ~ 17 kHz (25 Hz ~ 15 kHz ± 3 dB)
20 Hz to 18 kHz (25 Hz to 16 kHz ± 3 dB)
20 Hz to 8 kHz
20 Hz to 19 kHz (25 Hz to 18 kHz ± 3 dB)
20 Hz to 12.5 kHz
Signal-to-noise ratio Dolby OFF : 60 dB or more
Dolby ON : 70 dB or more (5 kHz or more)
(3rd harmonic distortion rate 3%, audibility correction)
Effect of Dolby HX
(normal tape)
Higher dynamic range of high frequency (10 khz)
0 VU recording : + 8 dB
+ 5 VU recording : + 15 dB
Distortion factor 1.2% or less (0 dB)
Operating part Feather-touch type direct change
Input Sensitivity / Maximum Allowable Input
/ Impedance
Mic : 0.35mV/80mV/11k Ω, 6 mm φ Jack
(Applicable Microphone Impedance : 250 Ω ~ 10k Ω)
Line : 63mV/25V/56k Ω, Pin Jack
Output Reference Level / Maximum Level
/ Load impedance
Line : 450mV/630mV/50k Ω, Pin Jack
Headset : 70mV/100mV/8 Ω, 6 mm φ Stereo Jack
Accessory function Dolby System (with LED Display)
Dolby HX System (with LED display)
Memory Stop / Play
Timer standby mechanism
REC Mute
Cassette rear light
2-color LED level meter (-20 to + 8 dB)
Automatic Tracking System (PMS)
One track repeat mechanism (music repeat)
Output level control
Air dump door
IC full logic control
Power eject
External dimensions Width 420x Height 120x Depth 357 mm
Weight 8.0kg