PHILIPS AV1002

Commentary

This 6-channel power amplifier was announced as the power amplifier part of the separate AV amplifier AV1000.

All channels use a discrete method.

You can configure the BTL connection with two channels as a single unit. If you use the BTL connection, the output is doubled to 100W and can be used as a high-power 3-channel amplifier.

There are independent tone controls for the front channel, center channel and surround channel.
It can also be bypassed by a separate defeat switch.

The front channel, center channel, and surround channel have independent input level controls.

Copper plated chassis is used on the entire surface.

The power supply section is equipped with a large 550 VA power transformer and a 27,000 μ Fx2 electrolytic capacitor.

Model Rating

Type	6-ch power amplifier
Rated Output (20 Hz ~ 20 kHz, THD0.03%)	Normal connection Front : 50W + 50W (6 Ω) Center : 50W + 50W (6 Ω) 100W (Center Only BTL) Surround : 50W + 50W (6 Ω) BTL connected Channel 1 : 100W (6 Ω) Channel 2 : 100W (6 Ω) Channel 3 : 100W (6 Ω)
Rated input level	1V
Frequency characteristic	10 Hz ~ 100 kHz -1dB (Normal Connection) 10 Hz to 80 kHz -1dB with BTL connection
S/N ratio (IHF-A)	110 dB (normal connection) 104 dB (BTL connected)
Damping factor	100 or More (6 Ω, 1 kHz)
AC outlet	Power switch interlock : 1 system, maximum 100W Power switch not linked : 1 system, maximum 100W
Pwer	100 VAC, 50Hz/60Hz
Power consumption	250W
Maximum external dimensions	Width 454x Height 150x Depth 339 mm
Weight	18.5kg