ONKYO Q-1

Commentary

This speaker system uses a newly developed top-mount system to create a comfortable space for sound.

A 16 cm pure cross carbon cone type woofer is used for the low range.
In addition to reducing the weight of the vibration system, we have strengthened the magnetic circuit by increasing the size of the magnet to achieve clearer low-frequency reproduction.
In addition, a newly developed ADM frame with increased damping capacity is used for the entire frame and field cover to suppress squeal.

A 2.5 cm plasma carbonated titanium dome type tweeter is used for the high range.
The surface of lightweight, high-rigidity titanium is hardened by the plasma method, and the hardness is about 5 times that of pure titanium. Moreover, the high-frequency resonance of the high-rigidity material is eliminated by the unique resonance cancellation structure.
Alnico magnet is used for the magnetic circuit.

The network reduces interference between network elements and signal paths by separating the woofer and tweeter on separate network boards.

The enclosure uses a top-mount system in which a tweeter is installed independently on the top of the cabinet.
This eliminates the baffle plate reflections that affect the tweeter region playback in conventional speakers and improves the high-range playback.
In addition, the positions of the tweeter and the woofer are adjusted in time by measuring impulse input.
The material is a 25 mm thick baffle plate for higher rigidity.

Model Rating

Method	2-way, 2-speaker, Bass reflex system Bookshelf Type / Magnetic Protection Design
Units Used	For low band : 16 cm cone type For high-pass : 2.5 cm dome type
Playback frequency band	37 Hz to 45000 Hz
Max Input	160W
Impedance	6 Ω
Output sound pressure level	89dB/W/m
Crossover frequency	2500Hz
Cabinet internal volume	14L
External dimensions	Width 230x Height 456x Depth 265 mm (including Sarannet and Tweeter)
Weight	9kg
Sold separately : Speaker Stand AS-Q1 (1 set of 2, ¥ 25,000)
External dimensions	Width 298x Height 493x Depth 298 mm Speaker Mounting Surface : Width 230x Depth 250 mm