ONKYO HTP-L3
¥ 30,000 (1 set of 6, sold on July 10, 2002)
Commentary
A 5.1 ch speaker system consisting of five satellite speakers D-L1 and a subwoofer SKW-10.
The D-L1 uses an 8 cm full-range speaker with an OMF diaphragm and an S-line edge that reduces the reflection of propagating waves at the diaphragm and edge junction.
The enclosure is made of MDF material with 60-mm-pitch screw holes for brackets at the bottom and wall mounting holes at the back.
The subwoofer SKW-10 uses the J' DRIVE system to eliminate the time lag with the main speaker.
The unit is equipped with a 16 cm cone woofer with an OMF diaphragm and S-line edge.
MDF material is used for the enclosure.
Model Rating
Type | 5.1 ch speaker system |
Specifications of Satellite Speaker D-L1 | |
Method | 1-Way, 1-Speaker, Sealed System, Bookshelf Type, Anti-Magnetic Design (EIAJ) |
Units Used | All-band : 8 cm cone speaker |
Rated impedance | 6 Ω |
Max Input | 30W |
Output sound pressure level | 83dB/W/m |
Frequency characteristic | 125 Hz to 25 kHz |
Cabinet internal volume | 0.6L |
External dimensions | 85 mm wide x 120 mm high x 112 mm deep |
Weight | 0.7kg |
Specifications of Subwoofer SWW-10 | |
Method | Built-in Amplifier / 1-Way / 1-Speaker / J' DRIVE System / Floor Type / Magnetic Protection Design (EIAJ) |
Units Used | For Ultra Low Band : 16 cm Cone Type |
Input impedance | Speaker level input : 4.7k Ω Line input : 65k Ω |
Maximum practical power | 40W (EIAJ, 4 Ω) |
Frequency characteristic | 35 Hz to 200 Hz |
Cabinet internal volume | 25L |
High-cut filter | Variable (50 Hz to 200 Hz) |
Auto standby | ON/OFF (with cancel switch) |
Power consumption | 30W (Electrical Appliances and Materials Safety Act) |
External dimensions | Width 190x Height 299x Depth 312 mm |
Weight | 7.6kg |
<General> | |
Attachment | Pin Cable (3m) Speaker cable (2.5mx3, 8mx2) Insulator x20 Cork Insulator x4 |