ONKYO D-N7TX
Single unit not yet sold (a set of two units, sold around 2007)
Commentary
A bookshelf-type speaker system developed for mini-components.
The D-N7TX is a speaker developed for Onkyo's mini component, and it was sold as a set in mini components such as X-N7TX and X-NX10A.
A 13 cm cone type woofer is installed in the low range.
An A-OMF monocoque cone is used for the vibration plate of this unit. The center cap, which was previously attached as a separate part, has been removed and the structure is integrally molded into a bowl shape. By balancing weight reduction and rigidity enhancement, division vibration is suppressed.
In the D-N7TX, the strength of the diaphragm is improved by modifying the manufacturing process of the diaphragm material, and the shape of each part such as the edge is also a new design.
A 3 cm ring type tweeter is installed in the high range.
It employs a balanced drive structure that uses the center of the diaphragm as a drive point. It can be driven smoothly even at around 20 kHz, greatly reducing split vibration. In addition, a new equalizer shape that is less susceptible to noise has been developed to improve expressive power in the vocal band.
The enclosure uses a bass reflex system.
The bass reflex duct employs an independently developed slit-shaped duct, the Aero Acoustic Drive, which greatly reduces noise radiation from the duct and unwanted resonance of the cabinet.
Model Rating
Method | 2-way, 2-speaker, Basref System, Bookshelf Type, Anti-magnetic Design (JEITA) |
Units Used | For low band : 13 cm cone type For High Frequency : 3 cm Ring Type |
Rated frequency range | 50 Hz to 100 kHz |
Max Input | 70W |
Rated impedance | 4 Ω |
Rated sensitivity level | 83dB/W/m |
Crossover frequency | 6kHz |
Internal volume | 8.0 liters |
Maximum external dimensions | Width 164x Height 282x Depth 258 mm |
Weight | 3.7kg |