Audio Database


64,000yen( It is 1 set in two sets, April, 1996 release)

The small 2 way speaker system which refined D-202A and was produced.

The 16cm cone type unit is adopted as low-pass.
In order to have adopted the bio-cross cone diaphragm as a diaphragm and to raise an intensity more, it is a non-press process, and is becoming empty and raising.
Furthermore, by giving a special coating to a perimeter part, a smooth high region damping characteristics is acquired, the direct wiring scheme which can be driven without a network is adopted, and the more nearly high-definition play is enabled.
Moreover, the acoustic stabilizer which suppresses an oscillation of a Woofer is carried.

A 2.5cm dome shape unit is adopted as the high region.
A diaphragm is firm as cellulose material and serves as a soft dome which adopted pure silk excellent in flattery nature.
Moreover, examination was repeated also for the network element and the film capacitor by German WIMA is adopted.

6 N-OFC voice coil of a high purity is adopted as a Woofer and each tweeter.

The cabinet has adopted the reinforcing board of an infinite form as the interior, it improves rigidity, and prepares sound, and also it has negated the stationary wave generated inside a cabinet.

the banana-plug correspondence in a speaker terminal carried out gilding brass shaving appearance, and the terminal is adopted.

Rating of a mode
Scheme 2 ways, 2 speaker bass-reflex scheme, and a bookshelf type
- Magnetic-shield design (EIAJ)
Using unit For low-pass: 16cm cone type
For high regions: 2.5cm dome shape
Play frequency band 36Hz - 35000Hz
The maximum input 80W
Impedance 5ohm
Output sound pressure level 90dB/W/m
Cross over frequency 3000Hz
Cabinet internal volume 14L
Dimensions Width 210x height 333x depth of 309mm (saran net included)
Weight 8.7kg
Option Speaker table lamp AS-200A (an It is 1 set in two sets, 22,000yen)