Audio Database


58,000yen( It is 1 set in two sets, June 13, 2001 release)

The speaker system which adopted the OMF diaphragm.

The 13cm cone type Woofer which used the OMF (ONKYO Micro Fiber) diaphragm is carried in low-pass.
It is considered as the multilayer structure to which the natural material changed and laid the orientation where many fibers are also located in a line in the nonwoven fabric which put an in-use cage and its fiber in order in the fixed orientation on top of this diaphragm, and also the intensity is raised by binding and fabricating double-sideds of a fiber layer with an unsaturated polyester resin. In addition to the little of the natural oscillation which is the distinctive characteristics of a natural fiber, this is reducing the noise generated from the diaphragm itself.
Moreover, in order to aim at a loss modification of a music intelligence, original S line edge is adopted.

The 2.5cm soft dome shape tweeter is carried in the high region.

The isolated rate wiring network which prevents the mutual induction of a circuitry inter-block is adopted as a network part.
Moreover, the capacitor by German WIMA is adopted as a network part.

The enclosure serves as a bass-reflex design which used MDF for the whole surface, and real wood thrust board finish is given.

The screw type speaker terminal corresponding to a banana plug is adopted.

The speaker cable by a monster cable company is attached.

Rating of a mode
Scheme 2 ways, 2 speaker bass-reflex scheme, and a bookshelf type
- Magnetic-shield design (EIAJ)
Using unit For low-pass: 13cm cone type
For high regions: 2.5cm dome shape
Play frequency band 40Hz - 35kHz
The maximum input 70W
Impedance 4ohm
Output sound pressure level 85dB/W/m
Cross over frequency 3.5kHz
Cabinet internal volume 10.0L
Dimensions Width 180x height 305x depth of 272mm
(A saran network, a terminal projection part included)
Weight 5.0kg
Adjunct Speaker cable Monster cable XP (1.8mx2)