Audio Database

Image of Integra A-755
Commentary

This pre-main amplifier has been improved based on excellent circuit technology and audition results in pursuit of high musical satisfaction.

The equalizer amplifier uses a push-pull circuit to achieve an allowable input of 650 mV, and the phono gain is a 3-step switching type that can be set according to the cartridge.

Equipped with a protection circuit.

Model Rating
Type Pre-main amplifier
Power Amplifier Unit
Circuit system Pure complimentary service all-stage direct connection circuit
Rated Output (1 kHz) 26W + 26W (8 Ω)
33W/33W (8 Ω)
Dynamic Power (IHF, 1 kHz) 82W (8 Ω)
Total harmonic distortion rate (1 kHz) 0.1% or Less (at Rated Output)
0.03% or less (at 10W output)
Power Band With (IHF, -3dB, THD 0.2%) 10 Hz to 100 kHz
Signal-to-noise ratio (IHF A network) 110dB
Damping Factor (DC ~ 20 kHz, 8 Ω) 80
Load impedance 4 Ω ~ 16 Ω
Rated input voltage / impedance (10 Hz to 50 kHz) 1V/100k Ω
Gain 24dB
Preamplifier Section
Input Sensitivity / Impedance
Phono Gain +6dB:
Nor:
-6dB:
1.2mV/50k Ω
2.4mV/50k Ω
4.8mV/50k Ω
Tuner, Aux, Play : 100mV/100k Ω
Total harmonic distortion factor 0.03% or Less (1 kHz at 1 V output)
RIAA deviation 30 Hz to 15 kHz ± 0.5 dB or less
Maximum allowable input
(1kHz/10kHz, Input Sensitivity NOR)
RMS:230mV/1.1V
P-P:650mV/3.1V
S/N (IHF A network) Phono1, Phono2 : 75 dB
Tuner, AUX, Play : 90 dB
Tone Control (2 db Step Type) Bass : ± 10 dB at 100 Hz, F.SHIFT 400 Hz
Treble : ± 10 dB at 10 kHz, F.S HIFT2 kHz
Turnover frequency Bass : 125 Hz, 400 Hz
Treble : 2 kHz, 8 kHz
Filter Low : 30 Hz, 6dB/oct.
High : 7 kHz, 6dB/oct.
<General>
External dimensions Width 423x Height 136x Depth 358 mm
Weight 8.5kg