|
| NIKKA CS-1000 |
|
| a price point -- unknown (one set, in the middle 1960s ?) |
A compact bookshelf type speaker system.
The
12cm cone type Woofer is adopted as low-pass.
This Woofer is designed so
that the bass property which was excellent when it attached to a small cabinet
may be shown, Underwriters-Laboratories edge which molded the plastics is used
for an edge, and cone paper is manufacturing special materials by the process.
Moreover, a large-sized magnet and little sealing yoke of the loss are
used for the magnetic circuit. It is efficient and low-pass dumping has
obtained the very good crisp bass play.
The horn type tweeter with an
aperture of 8cm is adopted as a high region.
The dedicated network which
12 dB/oct designed specially is used for a network.
Moreover, the product
line is suppressing each variation by the printed circuit board.
Perfect
closed mold is adopted as an enclosure.
In order to stop an air leak
completely, it has sealed completely using an optical property so that air may
not leak from the joint of a baffle board and a back board.
Moreover, he
fills a proper quantity of acoustic material in the interior, and is trying to
reproduce the good bass of dumping.
|
.JPG) |
.JPG) |
| Scheme |
2 ways, 2 speakers, a sealing scheme, and a
bookshelf type |
| Using unit |
For low-pass: 12cm cone type
For high
regions: 8cm horn type |
| Impedance |
8ohms |
| Frequency characteristic |
40Hz - 20000Hz |
| Allowable input |
12W |
| Music power |
24W |
| Dimensions |
Width 175x height 297x depth of 210mm
|
| Weight |
3.9kg |
|
|
|