Audio Database

The pictorial image of A-10XX Basic

AUTHENTIC A-10XX Basic
290,000yen(October 21, 1995 release)

Description
 
The Integrated Amplifier which inherited the functionality and performance of A-10XX.

The reserve power source of A-10 series tradition was carried, and the power-source part corresponding to a low load intensity is realized by adopting a large-sized transformer and a mass capacitor further.

The bias short type protection network is carried and all relay contact is removed from the signal path.

The twin monophonic construction is altogether used for it until an internal construction reaches a transformer, a filter, a capacitor, and the voltage amplification stage.

In order to realize high-definition play sound, the monocoque structure which suppressed the natural oscillation is adopted. Moreover, what has higher completeness is made to high rigidity and an oscillating-proof structure by the direct mechanical ground construction which A-10 series of dropping an oscillation into a terrestrial mass on heavyweight foot advocated.

The front panel begins to delete high-class aluminum, and is considering it as scratch finish.


Rating of a mode
Form Integrated amplifier
Output power (20Hz - 20kHz) stereo: 160W+160W (3ohm)
BTL: 320W (6ohm)
THD 0.01% (20Hz - 20kHz, 3 ohms, Output power)
Cross modulation distortion 0.01% (Output power)
Frequency characteristic 5Hz-300kHz+0 -3 dB
SN ratio 110dB
Input sensitivity/impedance Line1, 2 and 3:1V, 3V (High) / 18kohm
Line4, 5:0.3V/18kohm
BTL(CANNON): 0.5V/18kohm
Power source AC100V, 50Hz/60Hz
Power consumption 290W (Electrical Appliance and Material Control Law)
Dimensions Width 430x height 150x depth of 430mm
Weight 31kg