Audio Database

Picture of DA-F1000

FM/AM tuner manufactured by SANSUI.

Quartz PLL digital synthesizer system is used. In this system, the frequency from the local oscillator circuit and the accurate reference oscillation frequency of the synthesizer section are compared in phase, and the accurate center frequency of the IF filter is set electronically to improve the tuning accuracy.

The S/N ratio has been improved by adopting a newly developed circuit in the front end part.
A back-to-back type varicap is used to improve the ability to eliminate image interference of adjacent stations. In addition, a DC amplifier is used to improve the response of the loop and the ability to correct errors.

The IF stage is equipped with a ceramic filter with excellent group delay characteristics, which improves the contradictory characteristics of high selectivity and low distortion.
The signal to noise ratio (S/N) has been improved by adopting a double-tuned クォドラチュア detection system for the detection stage.

Equipped with a direct set function to input the frequency by a number.

FM/AM10 station random preset tuning is possible.

2-mode tuning system of auto and manual is adopted.

Model Rating
Type FM/AM Tuner
FM Tuner Section
Receiving frequency 76.0 MHz to 90.0 MHz, 100 kHz step
Practical sensitivity (IHF / old IHF) Mono : 10.5dBf/1.8 μ V
Signal-to-noise ratio Mono : 85 dB or more
Stereo : 80 dB or more
Frequency characteristic Stereo : 30 Hz ~ 18 kHz + 0.3 -0.8 dB
Distortion Factor (IHF, 65 dBf, 1 kHz) Mono : not more than 0.06%
Stereo : not more than 0.07%
Capture ratio 1.0 dB or less
Selectivity (IHF) 60 dB or More (400 kHz)
Spurious response ratio (IHF) 80 dB or More (83 MHz)
Image Response Ratio (IHF) 70dB(83MHz)
IF Response Ratio (IHF, Balanced) 80 dB or More (83 MHz)
RF Intermodulation (IHF) 65dB(83MHz)
AM suppression ratio (IHF) 55 dB or more
Stereo separation 52 dB or More (1 kHz)
<AM Tuner Section>
Receiving frequency 531 kHz ~ 1602 kHz, 1 kHz Step (9 kHz at Lock)
Practical sensitivity (IHF, bar antenna) 55dB/m (562 μ V/m)
Selectivity 34 dB or More (± 9 kHz)
Signal-to-noise ratio 46 dB or More (80dB/m)
Distortion factor (30% modulation, 80dB/m) Not more than 0.5%
Image Response Ratio (IHF) 45 dB or More (1000 kHz)
IF Response Ratio (IHF) 35 dB or More (1000 kHz)
Output Voltage / Impedance 0.5V/2.2k Ω
Pwer AC100V 50Hz/60Hz
Rated power consumption (Electrical Appliance and Material Control Law) 14W
External dimensions Width 460x Height 102x Depth 310 mm
Weight 5.0kg