Audio Database


This electronically controlled full-auto player was developed by putting in the technology cultivated in advanced machines.

To detect the record size, an optical system is applied to the automatic record size detection mechanism.
In this system, the reflector emits light from an obliquely upward direction, guides the light from the turntable seat reflector to the sensor, and changes the output of the sensor by irradiating or shielding the light according to the size of the record. This output is sent to the logic circuit, and the record size is automatically detected. Based on the detected record size, the needle down position and rotation speed are automatically determined.

Equipped with a quick response mechanism, even when the arm is ascending or descending by automatic operation, if you indicate the next operation with the button, it will move immediately to that operation.

Feather touch type using micro switch is adopted for the operation button.

The full-auto mechanism uses an EC (electronic control) circuit, which uses a single-chip LSI to accurately control complex operations.

Equipped with a needle tip protection function, the tone arm does not lower when there is no record on the turntable.

Uses a muting mechanism to cut noise.

Anti-resonance filter with weight case, butyl rubber butyl rubber, and damper added to the tone arm's needle pressure knob and main weight structure is used to reduce resonance.
In addition, by expanding the span of the pivot, looseness of the pipe part is eliminated, and high sensitivity is realized in both vertical and horizontal directions.

The motor used to drive the tone arm is a dedicated motor that is independent in both horizontal and vertical directions.

Stainless steel is used for the material of the tone arm to reduce the deflection of the pipe part.

A DC servo motor is used as the turntable drive motor.

Wooden cabinet is used for the cabinet.

The dust cover was sold separately.

Model Rating
Type Electronically controlled full auto player
<Turntable portion>
Drive system Direct drive
Motor DC servo motor
Turntable 324 mm Aluminum Alloy Die-cast, 1.4 kg
Number of revolutions 33 1/3, 45 rpm
Wow and flutter 0.03% (WRMS, JIS)
Signal-to-noise ratio 70dB(DIN-B)
Tone Arm Section
Format Static Balanced Universal S-Shaped Pipe
Total Length 320mm
Effective length 227mm
Overhang 14mm
Offset Angle 22 °
Tracking error angle + 2.8 °, -1.5 °
Needle pressure adjustment 0 ~ 3g Direct Reading Type (0.1g Step)
Head shell Glass Fiber Reinforced Plastic, 6.6g
Cartridge mounting weight range 5g ~ 11g
Pwer 100 VAC, 50Hz/60Hz
Power consumption 14W
External dimensions Width 455x Height 135x Depth 382 mm
Weight 7kg
Attachment 45 Rotation Adapter
Sold Separately Dust Cover HX-610 (¥ 2,500)