DIATONE DS-32C

Commentary

This is a floor-type speaker system for the first Diatone lineup released in 1968.
This is where the Diatone DS series started.

The DS-32C is a home-use version of the 2S 305 monitor speaker.

A 30 cm cone type woofer, PW 125 c, is mounted in the low range.
The unit is double-edged, with a wide cone paper edge to prevent mid-range valleys, and is designed for 2-way use and does not require a network as the high frequencies are attenuated at -12dB/oct.

The TW-25C, a 5 cm cone tweeter, is mounted in the high range.
This unit uses iron-cobalt-vanadium alloys (2 VPermender) to achieve high effective air gap flux density.

The enclosure uses a bass reflex method and the exterior is made of Eurasian cheek material.
In addition, the front cover RUNNET can be removed.

Model Rating

Method	2-Way, 2-Speaker, Bass Reflex System, Floor Type
Units used, etc.	For Low Range : 30 cm Cone Type (PW-125C) For High Range : 5 cm Cone Type (TW-25C) Network : -12dB/oct high-pass filter
Rated impedance	8 Ω
Playback frequency band	28 Hz to 20 kHz
Output sound pressure level	104dB/VA(50cm)
Crossover frequency	1.5kHz
Max Input	40W
External dimensions	Width 670x Height 1,030x Depth 385 mm
Weight	45kg
Specifications of the unit used
Model Name	PW-125C	TW-25C
Aperture	30cm	5cm
Nominal impedance	8 Ω	13 Ω
Playback frequency range	28 Hz to 1.5 kHz	1.5 kHz to 20 kHz
Output sound pressure level	104dB/VA	104dB/VA
Lowest resonance frequency	40Hz	1.5kHz
Effective air gap flux density	9,500gauss	20,000gauss
Total flux	364,000maxwell	1150,000maxwell
Permanent magnet	MK-5A	MK-5S-DG