Audio Database

The

DIATONE DS-10C
55,000yen(an It is 1 set in two sets, June, 1989 release)

Description
 
The Kelton system is adopted. By this system, it has composition which divided the enclosure by 2 chambers approximately and mounted the ellipse unit. With the driving force of 18cm x a 12cm ellipse unit, air in the enclosure was vibrated and the low-pass play of a rich feeling of a scale is realized with the energy.

DS- 10C is the composition made into the Sub woofer divide a cabinet up and down and according [ DS- ] the lower part to an ellipse unit (18cm x 12cm) according the upper part to 10cm+5cm 2 way bass-reflex composition. It is a speaker of the stick type which can be used for AV youth and pure audio.

Even if it puts on a television side, the formal magnetic-shield design (EIAJ) which cannot receive the interference from television easily simultaneously, either is adopted without disturbing a picture. Diaphragm drive capability was also raised simultaneously.


Rating of a mode
System A 3 way 3 speaker Kelton system and a floor type
- Magnetic-shield type (EIAJ)
Use unit For low-pitched sound: 18cm x a 12cm ellipse type Sub woofer
For [ all the ] zones: 10cm corn type
For loud sounds: 5cm corn type
Nominal impedance 8ohms
Play frequency band 50Hz - 20000Hz
Output sound pressure level 89dB/W/m
The maximum input 80W(EIAJ)
Dimensions Width 260x height 960x depth of 310mm
Weight 12kg
Attachment OFC speaker cable