DIATONE DA-U660
¥ 59,800 (around 1975)
Commentary
Pre-main amplifier.
Model Rating
Method | Pre-main amplifier | ||||
Power Amplifier Unit | |||||
Output (both channel operation) |
|
||||
Harmonic distortion factor | 0.5% (Rated) 0.07% (at 1W) |
||||
Cross modulation distortion factor | 0.07% (at 1W) | ||||
Power bandwidth | 20 Hz to 50 kHz | ||||
Damping factor | 40 (8 Ω) | ||||
Residual noise | 0.3mV | ||||
Input Sensitivity / Impedance | 1V/50k Ω | ||||
Preamplifier Section | |||||
Input Sensitivity / Impedance |
|
||||
Output Level / Impedance |
|
||||
Harmonic distortion factor | 0.05% | ||||
Frequency characteristic |
|
||||
Tone control | Bass : ± 10 dB (100 Hz) Treble : ± 10 dB (10 kHz) |
||||
Filter | Low:40Hz(12dB/oct) High:9kHz(12dB/oct) |
||||
Phono allowed input | 190 mv (1 khz 0.1% Distortion) | ||||
Input reduced noise | Phono:-118dB(V) High Level Input:-100dB(V) MIC:-124dB(V) |
||||
<General> | |||||
Pwer | AC100V 50Hz/60Hz | ||||
Power consumption | 97W | ||||
External dimensions | Width 400x Height 148x Depth 313 mm | ||||
Weight | 10kg |