MICRO MD-700
¥ 44,800 (around 1973)
Commentary
Turntable adopting direct drive system.
A 2 kg aluminum die-cast turntable is driven by a direct drive system using a DC servo motor that is not affected by fluctuations in power supply frequency.
33 1/3, electronic circuit for speed check of 1/3 and 45 revolutions.
The 0 adjustment on the meter is calibrated to match the constant speed rotation of the motor using a frequency counter.
33 1/3 and 45 rotations Equipped with independent speed control mechanisms for fine adjustment of ± 6%.
Aluminum die-cast is used for the panel.
There was a cabinet exclusively for MD-700 sold separately. The height of this cabinet is adjustable.
Model Rating
Type | Turntable |
Drive system | Direct drive |
Number of revolutions | 33 1/3, 45 rpm |
Motor | DC servo motor |
Turntable | 31 cm aluminum die cast, 2 kg |
Uneven rotation | Not more than 0.04% |
Signal-to-noise ratio | 58 dB or more |
Rotational speed adjustment range | + / - 6% of the specified speed |
Power consumption | 10W |
External dimensions | Width 343x Height 124x Depth 375 mm |
Weight | 6.5kg |
Sold Separately : Dedicated Cabinet MW-7 for MD-700 (¥ 19,500) | |
External dimensions | Width 535x Height 95x Depth 420 mm (Excluding Dust Cover) |
Weight | 9.5 kg (base) 1.7 kg (Dust Cover) |