MICRO MA-77mkII
¥ 9,800 (around 1972)
Commentary
This is a tone arm that uses Micro's original spring type inside four scan cellar after all the problems of the offset type tone arm have been cleaned.
The side pressure can be changed according to the needle pressure of the cartridge by the spring system inside four scan seller.
By using a hard gold plated connector and a 55pF/m low-capacity output cord, it is compatible with discrete 4 ch, etc.
Model Rating
Type | Static balanced tone arm |
Total Length | 335mm |
Effective length | 237mm |
Height adjustment range | 47 mm ~ 92 mm (from the motor board surface to the cartridge mounting surface) |
Offset Angle | 21 degrees |
Overhang | 15mm |
Tracking error | 1.5 degrees or less |
Compatible Cartridge (Dead Weight) | 2g ~ 18g |
Shell dead weight | 9.7g |
Needle pressure variable range | 0 ~ 3g Direct Reading (1 Turn) |
Maximum Rear Length | 80mm |
Side pressure variable range | 0 to 330 mg |