McIntosh C34V
¥ 680,000 (released in October 1986)
Commentary
A control amplifier that reduces interference by using an optional external interlocking switching method for video signal selection.
Equipped with a 5-band equalizer and compensator, it can also be inserted into a recording system.
As an accessory circuit, there is a video selector MVS-1, which can be connected to a C34V to switch the video signal without affecting the audio circuit.
The speaker control relay SCR-2 allows switching between two AC-systems and two speaker systems.
Model Rating
| Type | AV control center |
| Preamplifier Section | |
| Frequency characteristic | 20 Hz ~ 20 kHz + 0 -0.5 dB |
| Maximum output voltage | 10 v (20 Hz ~ 20 kHz) |
| Total harmonic distortion factor | 0.01% or Less (20 Hz ~ 20 kHz) |
| Input sensitivity | Phono : 2 mV (IHF0.4 mV at 2.5 V output) High level : 250 mv (IHF50mV at 2.5 v output) |
| Signal-to-noise ratio | Phono : 90 dB or more (input 10 mV, IFF84dB) High level : 100 dB or more (IHF86dB at 2.5 V output) |
| Maximum allowable input | Phono:100mV High level : 10 v |
| Input impedance | Phono : 47k Ω, Capacitance 65 pf High level : 50k Ω |
| Equalizer | ± 12 db (center frequency : 30 Hz, 150 Hz, 500 Hz, 1.5 kHz, 10 kHz) |
| Venonat der Ratio | 2 : 1 Compression to 1 : 2 Expansion |
| LF and HF filters | 12dB/oct (roll-off 50 Hz, 7 kHz) |
| Loudness control | Continuously variable |
| Monitor Amplifier Section | |
| Rated output | 20W + 20W (8 Ω, 20 Hz to 20 kHz) |
| Frequency characteristic | 20 Hz ~ 20 kHz + 0 -0.2 dB |
| Input sensitivity | 750 mv (27k Ω, IHF170mV) |
| Signal-to-noise ratio | 100dB(IHF170mV) |
| <General> | |
| AC outlet | Turntable interlock (100W, green) : 1 system Power switch interlock (black) : Route 3 Power switch not linked (red) : 2 systems |
| Pwer | 100 VAC, 50Hz/60Hz |
| External dimensions | Width 406x Height 138x Depth 330 mm |
| Weight | 11.8kg |