Marantz PM4000
Discretionary price (released in November 1999)
Commentary
This is a pre-main amplifier of the C series which has reverified "reproducibility of music" by going back to the idea of original Marantz.
The design also takes into consideration matching with the B & W speaker system.
Equipped with tone defeat circuit and loudness control.
Equipped with a dedicated CD-R/MD terminal.
Equipped with two types of speaker terminals for banana plugs.
Equipped with Phono MM input.
Hairline finish is applied to the front panel.
There are 2 color variations, titanium gold and black.
Comes with a system remote controller that allows simultaneous operation of Marantz products.
.jpg)
.jpg)
Model Rating
| Type | Pre-main amplifier |
| Rated output (20 Hz to 20 kHz, both channels driven simultaneously) |
50W + 50W (4 Ω) 40W + 40W (6 Ω) 30W + 30W (8 Ω) |
| Dynamic Power | 70W + 70W (4 Ω) 60W + 60W (6 Ω) 50W + 50W (8 Ω) |
| Total harmonic distortion factor | 0.03% (20 Hz to 20 kHz, 8 Ω load) |
| Intermodulation Distortion Factor (SMPTE) | 0.015% |
| Frequency Response (CD, Source Direct) | 10 Hz ~ 100 kHz + 0 -3dB |
| Input Sensitivity / Impedance | Phono MM : 2.5mV/47k Ω High Level : 150mV/20k Ω |
| Phono maximum allowable input (1 kHz) | MM:170mV |
| RIAA deviation (20 Hz to 20 kHz) | 20Hz -3dB 40 Hz to 20 kHz ± 0.3 dB |
| S/N ratio (A-weight correction) | Phono MM:86dB High Level:96dB |
| Input terminal | Line Entry : Route 3 Tape input : 1 line Phono input : 1 system CD-R/MD input : 1 system |
| Output terminal | Tape output : 1 system CD-R/MD output : 1 system Two speakers Headphone : 1 system |
| Power supply voltage | 100 VAC, 50Hz/60Hz |
| Power consumption | 100W (Electrical Appliances and Materials Safety Law) |
| Maximum external dimensions | Width 440x Height 116x Depth 345 mm |
| Weight | 6.0kg |
| Attachment | System remote control |