Marantz ModelP3600

Commentary

A control amplifier which is a selection item of Model3600B.

The Model3600B is subjected to a thorough examination, and the items that show particularly excellent measured values are selected with the name of a professional.
The front panel uses a thick 8 mm solid panel and is a 19-inch rack mount type.

In designing the basic circuit, the input source as much as possible and each component on the circuit are programmed into a computer, and simulation is carried out many times to obtain the highest value in each characteristic such as harmonic distortion, intermodulation distortion, S/N ratio, etc..
In addition, listening tests are conducted using the know-how obtained through experience and ears.

The rear panel has terminals for the main and remote speakers, which can be switched by the control amplifier.

Equipped with scope output, input waveform can be observed in combination with Tuner Model150.

There was a wood cabinet of mahogany as an option sold separately.

Model Rating

Type	Control amplifier
Frequency characteristic	20 Hz to 20 kHz ± 0.25 dB
Total harmonic distortion factor	0.02% or Less (20 Hz to 20 kHz)
Channel separation	40 dB or more
Gain	Phono-Pre out:60dB Phono-Rec out:40dB Line-Pre out:20dB
Input equivalent noise	Phono : 0.775 μ V or less
Input Sensitivity / Impedance	Phono : 1mV/47k Ω Line : 100mV/25k Ω
Output level	3Vrms 10Vmax
Tone control	Bass : + / - 10 dB Mid : ± 8 dB Treble : + / - 10 dB
Filter	High:9kHz Low:30Hz
Pwer	100 VAC, 50Hz/60Hz
Power consumption	6W
External dimensions	Width 483x Height 178x Depth 241 mm (Width and height are panel size)
Weight	7.3kg
Sold Separately	Mahogany Cabinet WC-P2 (¥ 22,000)