MACTONE XC-5
¥ 37,500 (around the mid 1960 s?)
Commentary
A control amplifier with an emphasis on musical performance.
The equalizer section uses a K-K / NF equalizer to especially reduce distortion in the high-frequency range.
The tone circuit has low-frequency 3-step switching and can be reduced.
It adopts a gorgeous aluminum gold panel design and improves durability by using the best domestic parts.
Model Rating
Type | Stereo control amplifier | ||||
Distortion factor | Within 0.08% (at 1 kHz, output 1 V) | ||||
Frequency characteristic | 10 Hz to 100 kHz + 0 -1dB | ||||
Input Sensitivity / Impedance | PhonoI, II : 1.5mV/50k Ω Tape head : 1mV/500k Ω Tuner, aux : 150mV/100k Ω |
||||
Output impedance | Main out : 1200 Ω Rec out : 700 Ω |
||||
SN ratio (input conversion value) | phono:111dB tape head:105dB Tuner, aux : 88 dB |
||||
Tone control |
|
||||
Tape circuit | Tape monitor DIN connector |
||||
Used vacuum tubes, etc. |
|
||||
External dimensions | Width 380x Height 130x Depth 250 mm | ||||
Weight | 7kg |