Audio Database

The

Lo-D HS-01
10,000yen( It is 1 set in two sets, 1981 release)

Description
 
The speaker system of the compact size which adopted a 5cm full-range unit.

A 5cm cone type full-range unit is adopted as a unit.
This unit has lowered fo by adopting the Than Gen Shal edge. Moreover, since the swing is ±4mm with high compliance greatly, low-pass flattery nature becomes good and is reducing distortion.
Moreover, high region resonance frequency is lengthened by using a sailor cap type, the play band of a high region is extended, and dispersibility is raised.

"55mm in diameter / 8mm in thickness" are adopted as a magnet.

An enclosure adopts die casting as a front baffle, and the shell plate is aiming at the oscillating reduction by considering it as dual structure.

The interconnection with the stereo miniplug of a stereo cassette recorder is possible by it not only being able to using it for the loudspeaker output of amplifier, connecting in loudspeaker code, but using an attached connecting cord with a plug.
Furthermore, it can change into a stereo headphone jack standard plug by an attached pin adapter, and can connect with the headphone jack of amplifier or a tape deck.

Two kinds of colour variations, silver and gold, occurred.

The Using

Rating of a mode
Scheme 1 way, 1 loudspeaker, a sealing scheme, and a bookshelf type
Using unit 5cm cone type
Frequency band 150Hz - 20kHz
Impedance The contact button for attached pin codes: 20ohms
The contact button for loudspeaker codes: 88ohms
Maximum permissible input
(A music signal peek, 8ohms)
The contact button for attached pin codes: 3W
The contact button for loudspeaker codes: 70W
Output sound pressure level 83dB/2.83V/1m
Dimensions Width 68x height 88x depth of 58mm
Weight 0.55kg