Audio Database

The

Lo-D HCA-6500
29,000yen(around the 1979 time)

Description
 
Control amplifier developed aiming at the low-distortion low noise.

The low-noise FET transistor was adopted as the first rank of an equalizer circuitry, IC for equalizers was adopted as the 2nd step, and the high property is realized.

It has the interrupt control logic-DC stream composition for tone-quality pursuit.

Tapes dubbing is also possible, enjoying a play of other sources.


Rating of a mode
Form Control amplifier
Input sensitivity/impedance Phono: 2.5mv/50kohm
Tuner, Aux, Tape1, 2:150mV/40kohm
An Output voltage/impedance Tape Rec out: 150mV/1kohm
Maximum permissible input 150mV (RMS, 1kHz, THD0.1%)
Frequency characteristic Phono: 20Hz-20kHz±0.3dB
Tuner, Aux, Tape play: 20Hz - 20kHz
S/N (IHF, A network) Phono:83dB
Tuner, Aux, Tap play: 90dB
THD (1kHz) Phono:0.005%
Tuner, Aux, Tape play: 0.005%
Supply voltage AC100V, 50Hz/60Hz
Power consumption (Electrical Appliance and Material Control Law) 3W
Dimensions Width 435x height 78x depth of 275mm
Weight 3.5kg