LUXKIT Accessory Series
- A-5
¥ 3,500 (released in February 1980)
Remote power switch kit.
The built-in relay operates by operating the power switch of one device such as a preamplifier, and the power supply of up to five devices can be turned on / off.
It is designed to fit in SR800.
Maximum load power : Total600W
(switched : 500W, unswitched : 500W)
External Dimensions : Width 127x Height 40x Depth 56 mm
- A10
¥ 6,500 (released in February 1980)
Remote power switch kit.
The A10 can turn ON/OFF the power of up to 6 devices by operating a single power switch.
Relay is used for the switch operation, and the power required for the power switch is limited to a small amount.Maximum load power Total 1KW
Channel-A:500W
Channel-B:500W
Channel-C:1KW
Spare Outlets : 500WPower consumption 1W External dimensions Width 240x Height 52.5x Depth 80 mm Weight 1.0kg
- E12
¥ 3,300 (released in August 1980)
A power controller kit that can continuously adjust the temperature of the soldering iron, the brightness of the incandescent light, the rotational speed of motors like fans and ventilation fans, etc.
Power is controlled by adjusting the energization time using the switching method of the controlled rectifier element (TRIAC).
The handling capacity differs depending on whether it is a resistance type such as soldering iron or an inductive type such as motor, and a noise prevention circuit is also mounted.Maximum power consumption Resistive Load : 200W
Inductive Load : 85WExternal dimensions 54 mm wide x 53 mm high x 98 mm deep Weight 300g
- E15
¥ 5,000 (released in February 1980)
Thermo-photo sensing switch kit that detects light brightness and temperature, and automatically turns ON/OFF 100 VAC power supply with high-precision relay.
The light amount is detected by the included CDs, and the temperature is detected by the thermistor set sold separately.External dimensions 54 mm wide x 53 mm high x 108 mm deep Sold Separately Thermistor Set ET15 (¥ 3,000)
- E20
¥ 18,000 (released in January 1981)
Power controller kit for large power (1 kWmax.).
It can be continuously adjusted from 0 to 100% to the floor without permission.
Equipped with self-fading function that can adjust power automatically.Use Dimming of incandescent lamps
Adjusting the number of revolutions of the electric drill
Etc.External dimensions Width 127x Height 75x Depth 230 mm Weight 1.5kg
- EM11
¥ 22,000 (released in June 1978)
A small microphone mixer kit that can mix two microphone inputs and one stereo line input.
Feature Pan pot (Microphone 1, 2 independent)
Echo circuitInput sensitivity Mic:2mV
Line in:100mVDistortion factor Not more than 0.1% External dimensions Width 230x Height 75x Depth 127 mm Weight 1.8kg
- M-1G
¥ 5,000 (around 1980)
Pink / white noise generator.
M-1G can generate white noise with flat frequency characteristics and pink noise with uniform energy for each octave.
Can be used an audio spectrum indicator A810, it can be used to measure listening rooms.<Body> Output voltage 270mV Current consumption 20 mA (continuous 3 hours possible at 006P) External dimensions Width 68x Height 56x Depth 104 mm Weight 280g (including battery) <Attached Microphone> Format Electret / Condenser Type (Non-directional) Sensitivity -65dB (0 dB = 1 V / μ bar, 1 kHz) Battery used 9 v (006P, can be used continuously for 150 hours)
- SR800
Basic set : ¥ 10,000 (circa 1980)
SU-2 : ¥ 4,500 (around 1980)
SU-3 : ¥ 6,000 (around 1980)
Rack kit for A800 series products.
The basic set can store up to 3 units, and the system can be upgraded by combining SU-2 for adding 2 units and SU-3 for adding 3 units.
The SR800 is designed to be self-supporting with 2 legs, but by removing the legs it can also be used as a wall mount. When hanging on the wall, up to 3 units can be stored.
External Dimensions : Width 350x Height 620x Depth 70 mm
Leg dimensions : 42 mm sq., length 225 mm