LUXKIT A902-M
¥ 85,000 (released in 1983)
Commentary
Stereo power amplifier kit for battery drive.
Battery drive is possible with A902-M in combination with battery adapter OP902-B.
In this case, only the voltage amplifier stage that has the most influence on sound quality and performance is driven by the battery.
For the first time in a kit product, it is equipped with a duo-beta circuit / S using a single-stage amplifier developed by Lux, which simplifies the signal path and realizes a high-speed circuit.
The NON-NFB circuit of the power stage is available, and NFB/NON-NFB can be switched on the panel.
Four output modes are available. For stereo, you can select A or AB by switching the switch on the panel. For monaural, you can select A or AB.
Oxygen-free copper wires and non-magnetic parts are used to simplify the circuit and carefully examine the materials.
The power supply consists of a large circular transformer and a 30,000 μ F capacitor.
Model Rating
Type | Stereo power amplifier | |||||
Stereo | Monaural | When battery power is supplied | ||||
Class A | Class AB | Class A | Class AB | Class A (stereo) | Class A (monaural) | |
Continuous effective output (8 Ω, 20 Hz to 20 kHz) |
30W+30W (Both Channel Operation) |
120W+120W (Both Channel Operation) |
120W | 350W | 25W+25W (Both Channel Operation) |
100W |
Total harmonic distortion factor (20 Hz to 20 kHz) |
0.01% or less (0.04%) |
Not more than 0.015% (0.1%) |
Not more than 0.04% (0.25%) |
Not more than 0.015% (0.1%) |
Not more than 0.008% (0.03%) |
Not more than 0.02% (0.2%) |
Cross modulation distortion factor (60Hz:7kHz=4:1) |
Not more than 0.007% | 0.01% or less | Not more than 0.008% | Not more than 0.005% | Not more than 0.008% | |
Frequency characteristic | 5 Hz to 100 kHz -1dB | 5 Hz to 80 kHz -1dB | 5 Hz to 100 kHz -1dB | 5 Hz to 80 kHz -1dB | ||
Input sensitivity | 480mV | 970mV | 480mV | 850mV | 440mV | 440mV |
Signal-to-noise ratio (IHF correction, input short circuit) |
108 dB or more | 117 dB or more | 112 dB or more | 120 dB or more | 110 dB or more | 115 dB or more |
Residual noise | 0.3 mV or less | 0.4 mV or less | 0.25 mV or less | 0.35 mV or less | ||
Channel separation | 82 dB or More (1 kHz) | - | 82 dB or More (1 kHz) | - | ||
Damping factor | 80 or More (8 Ω Load, 1 kHz) | 55 or More (8 Ω Load, 1 kHz) | 82 or More (8 Ω Load, 1 kHz) | |||
Power supply voltage | 100 VAC, 50Hz/60Hz | ± 24 V (50 mA), 100 VAC, 50Hz/60Hz | ||||
Power consumption (Electrical Appliance and Material Control Act) |
210W(210W) | 480W | Up to 290W | Up to 750W | ± 24 v, 50 ma, 150W | ± 24 v, 50 ma, 220W |
Attachment | Input level control Class A / Class B switch NFB/NON-NFB selector switch Charge switch (when OP902-B is connected) Speaker protection with DC drift detection Overcurrent protection circuit Power switch indicator (time mute, flashing when protective circuit is operating) Charge indicator (when connected to OP902-B) NON-NFB switch indicator AB class action indicator A-class operation indicator |
|||||
External dimensions | Width 440x Height 150x Depth 420 mm | |||||
Weight | 10.3kg | |||||
Sold Separately | Battery Adapter Kit OP902-B (¥ 40,000) Meter Adapter Kit OP902-D (¥ 22,000) |