LUXKIT A506
¥ 39,800 (around 1982)
Commentary
A500 series 2-way channel divider kit.
A506 does not include CR parts for cut-off frequency. By combining a separately sold filter, the desired cut-off frequency value can be selected.
The filter is based on a Bessel type with no peak and excellent phase characteristics.
The filter section is provided on a separate substrate, and two types of Bessel type and one type of Butterworth type can be selected for attenuation characteristics.
Separately sold CR506L and CR506H are Bessel type and set with CR that can configure 2 types of filters of -18dB/oct and -24dB/oct. In addition, by attaching desired parts, Butterworth type can configure attenuation characteristics of -12dB/oct.
It is equipped with a volume that can be continuously changed up to -10dB, and -10/-20dB attenuators that can be used separately for left and right channels, Low and High. It can be used in combination for fine level adjustment.
The k-curve is used for the volume change characteristics, and the rotation angle and attenuation are matched.
The power supply consists of separate left and right winding transformers and separate rectifier circuits to minimize crosstalk.
A506 is a 2-way type, but it can be used in 3 or 4 ways by combining 2 or 3 units.
Model Rating
Type | Two way Electronic Crossover Network Kit |
Input impedance | 1M Ω |
Output impedance | 100 Ω |
Frequency characteristic | 5 Hz ~ 100 kHz + 0 -2dB |
Distortion factor | 0.005% or Less (Output 2 v) |
Insertion loss | Within -1dB |
Crossover frequency | CR Substrate Plug-in Type |
Damping property | (-12dB/oct.), -18dB/oct., -24dB/oct. Bessel Type, Butterworth Type (Selective Type) |
Level Control | Left / right, Low/High, independent VR : 0 ~ -10dBx4 ATT : -10dB, -20dBx4 |
AC outlet | Power switch interlock : 2 systems Power switch not linked : 1 system |
Power consumption | 10W |
External dimensions | Width 438x Height 85x Depth 320 mm |
Weight | 4.5kg |
Sold Separately : Low Frequency Filter CR Set CR506L (¥ 8,500) | |
Damping property | -18dB/oct., -24dB/oct., Vessel Type |
Crossover frequency | 80, 100, 150, 250, 300, 500, 800 Hz |
Sold Separately : High Pass Filter CR Set CR506H (¥ 6,000) | |
Damping property | -18dB/oct., -24dB/oct., Vessel Type |
Crossover frequency | 1.5k, 3k, 5k, 8 kHz |