LUXMAN L-400
¥ 59,000 (Released in November 1982)
Commentary
This is a pre-main amplifier of the Revolver series with duobeta technology.
The power amplifier section is equipped with a duo-beta circuit, and high sound quality is achieved by DC servo which tightens the sound image from the appropriate NFB over the whole band and from the ultra-low band outside the super-band.
Built-in high-gain MC equalizer.
The tone control is equipped with a turnover frequency shift tone control.
The amount of change and the amount of change and the frequency at which it begins to change, making it possible to adjust sound quality naturally and effectively to the audibility.
Model Rating
Type | Integrated amplifier |
Effective power | 63W + 63W (8 ω, 1 khz, both channels) |
Total harmonic distortion factor | 0.02% or Less (8 Ω, -3dB, 20 Hz to 20 kHz) |
Cross modulation distortion factor | 0.02% or Less (8 Ω, 60 Hz : 7 khz = 4 : 1) |
Input Sensitivity / Impedance | Phono MM : 1.8mV/50k Ω Phono MC : 250 μ V/100 Ω Tuner, AUX/DAD, Monitor : 160mV/40k Ω |
Signal-to-noise ratio (IHF-A) | Phono MM : 90 dB (input short, 5 mV conversion) Phono MC : 67 dB (input short, equivalent to 250 μ V) Tuner, AUX/DAD, Monitor : 105 dB |
Frequency characteristic | Phono : 20 Hz to 20 kHz ± 0.5 dB Tuner, Aux/DAD, Monitor : 10 hz to 100 khz -1.5 db |
Tone control | ± 8 dB (100 Hz, 10 kHz) |
Filter | Subsonic Filter : 30 Hz High-cut Filter : 7 kHz |
Low boost | + 7.5 dB, 100 Hz |
Tape monitor | Two systems (Tape-1, Tape-2) |
Tape dubbing | 1 → 2 |
Speaker switch | Route 2 |
Power consumption | 125W |
External dimensions | Width 453x Height 111x Depth 321 mm |
Weight | 7.6kg |