Audio Database
2000
Commentary

The highest quality receiver from Reek.

The complimentary service stage of the power amplifier consists of a pure output-type OCL, and the A-class driver stage uses a constant current circuit, making it resistant to load fluctuations.

A differential amplifier is used at the input stage of the preamplifier to ensure a high S/N and a precise equalizer curve, and a PLL decoder is used in the MPX demodulator of the FM to ensure stable separation.

Model Rating
Type FM/AM Receiver
Power Amplifier Unit
Output 30W + 30W (both channel operation, 8 Ω, THD0. 5%)
BTL output 80W(mono)
Total harmonic distortion factor 0.01% (1W, 1 kHz)
0.1% (30W, 10 kHz)
Output bandwidth 10 Hz to 40 kHz -2dB (both channel operation, 30W, THD 0.5%)
Damping factor 40(80Hz)
Residual noise 1 mV (maximum volume)
Preamplifier Section
Input Sensitivity / Impedance Disc : 2.2 mv, 6mV/47k Ω
Tape, Cassette, AUX : 140mV/100k Ω
Signal-to-noise ratio Disc:-65dB
Tape, Cassette, AUX : -80dB
Allowable input Disc:+35dB
Recorded output 140mV
Tone control Treble : ± 13 dB (15 kHz)
Bass : ± 13 dB (50 Hz)
FM Tuner Section
Sensitivity 1.6 μ V (IHFM)
Distortion factor 0.5% (stereo, 1 kHz)
Signal-to-noise ratio -65dB (100% modulation, 1 mV input)
Image ratio -45dB
IF interference ratio -60dB
AM suppression ratio -50dB
Capture ratio 1.5dB
Variable range of muting level 5 μ V ~ 50 mv
Frequency characteristic 40 Hz to 14 kHz ± 1.5 dB
Channel separation 35dB(1kHz)
30dB(10kHz)
<AM Tuner Section>
Sensitivity 20mV
Image ratio -40dB
Selectivity 25dB(IHFM)
<General>
External dimensions Width 471x Height 132x Depth 292 mm
Weight 9.7kg