JBL XTi10C
¥ 45,000 (1 unit, around 2000)
Commentary
Center speaker of XTi series using hexagonal enclosure.
Two 12.5 cm cone type woofers are installed in the low range.
Pulp cone with corrugation rib is used for the diaphragm, and bent pole piece is used for the magnetic circuit to suppress dynamic compression.
A 2.5 cm dome type tweeter is installed in the high range. This unit uses pure titanium diaphragm and aluminum voice coil.
The enclosure uses a bass reflex system.
This enclosure has a one piece structure that seamlessly integrates the front and side and the rear and side. It is a hexagonal enclosure consisting of four pieces (top, bottom, front side and rear side) that minimizes internal planarization and reduces internal standing waves.
It supports bi-wiring and bi-amplifier connections.
The speaker terminal uses a gold-plated binding post type for banana plugs.
There was a speaker stand as an option sold separately.
Model Rating
Method | 2-way, 3-speaker, bass reflex system, center type, magnetic protection design |
Units, etc. | For low band : 12.5 cm cone x2 For high-pass : 2.5 cm dome type |
Frequency characteristic | 60 Hz to 35 kHz |
Output sound pressure level | 89dB/2.83V/m |
Input impedance | 6 Ω |
Allowable input | 50W(RMS) |
Crossover frequency | 3.5kHz |
External dimensions | Width 510x Height 197x Depth 258 mm |
Weight | 7.0kg |