JBL Model S119

Commentary

Sound field type speaker system that reproduces sound by indirect sound spread without relying on direct radiation of sound.

Four 2.5 cm (1 inch) domed tweeters are installed at each corner of the upper slit in a horizontal direction.
In addition, a 20 cm (8 inch) cone woofer, which is used for the low range, is built into the enclosure and is installed vertically upward.
This ensures a 360-degree service area around the entire circumference.

The crossover is a 3 kHz, -12dB/oct. high-pass filter for the woofer only, and the tweeter is an all-band-pass design similar to the full-range speaker.
The combination of the crossover between the tweeter that naturally attenuates to the low band and the woofer that supports it, and the bass reflex duct tuning around the enclosure also achieves a good balance and texture.

There were three types of enclosures : Model S119WX with walnut finish, Model S119BK with black lacquer finish, and Model S119WH with white lacquer finish.
The speaker jacks are set at the bottom.

Model Rating

Method	2-Way, 5-Speaker, Bass Reflex System, Floor Type, Anti-magnetic Design
Units Used	For low band : 20 cm cone type For High Pass : 2.5 cm Dome x4
Frequency characteristic	40 Hz to 20 kHz
Output sound pressure level	86dB/W/m
Impedance	8 Ω
Allowable input	100W Peak : 400W
Crossover frequency	3 kHz, 12dB/oct (Low Cut Only)
External dimensions	Width 254x Height 1016x Depth 254 mm
Weight	20.0kg