|
| INFINITY RS-5KAPPA |
|
| 85,000yen(one-set, around the 1990 time) |
2 way speaker system of the orthodox monitor size
which attained a high quality wide range in the restraint of being small.
The IMG (Injection molded graphite) Woofer of the 16.5cm aperture which
adopted graphite strengthening polypropylene is adopted as low-pass, and
the bass with few feeling of actual existence of a distorted feeling is
realized.
The EMITk tweeter is adopted as a high region.
The EMI (electro
magnetic induction) type loudspeaker makes possible a transient response and a
Low-noise-izing excellent in the principle target in order to carry out the
direct drive of the lightweight diaphragm by a powerful magnetic field.
The loud sound which does not have a distorted feeling in the EMITk tweeter
of RS-5KAPPA while using the Low-Mass Kapton film diaphragm and a rare
earth neodymium magnet and aiming at a wide-range play is realized.
The network repeated
the computer-aided design and the audition experiment, and has chosen each part.
Low-pass carries a L/C tuning circuitry original with Infiniti, and is
developing the bass play threshold to the lower part.
Natural oak
material finish is given to the material which an enclosure is the closed mold
of the round baffle structure where it was considered plastically, and was
selected carefully, and the technology of Infiniti is condensed until it crosses
a mat coating baffle etc. to a detail.
|
| Scheme |
2 ways, 2 loudspeakers, a sealing scheme, and a bookshelf type |
| Using unit |
For low-pass: 16.5cm cone type
For high
regions: EMITk type |
| Frequency band |
46Hz - 45000Hz |
| Conformity input |
20W-100W |
| Output sound pressure level |
87dB/W/m |
| Cross over frequency |
4500Hz |
| Impedance |
4ohms |
| Dimensions |
Width 431x height 266x depth of 228mm
|
| Weight |
8.5kg |
|
|
|