GOTO UNIT CF-1
3-way : ¥ 65,000 (around 1978)
4-way : ¥ 75,000 (around 1978)
Commentary
Channel divider designed for 4-way use using Goto unit.
The CF-1 was designed for 4-way use, but it could be used from 3-way to upgrade to 4-way.
NF type with sharp cut-off characteristics and good shoulder characteristics is adopted for the circuit type.
We use carefully selected parts.
The printed circuit board of the filter part is fixed type rather than plug-in type, which suppresses noise caused by contact resistance.
A constant voltage circuit is used for the power supply.
Model Rating
Type | Channel dividing amplifier |
Split band | L channel : 220 Hz or less M channel : 220 Hz to 1 kHz MH channel : 1 kHz to 5 kHz H-channel : 5 kHz or more |
Crossover frequency deviation | Within ± 4% |
Damping property | 18dB/oct |
Passband gain | -1dB (with output regulator for M, MH and H channels) |
Input impedance | 50k Ω |
Output impedance | 300 Ω or less (at maximum output for M, MH, and H channels) |
Maximum allowable input | 3Vrms |
Distortion factor | 0.15% or Less (at 1 V Input) |
Signal-to-noise ratio | 90 dB or more (at each channel input of 1 V) |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | Approximately 1.5 VA |