FOSTER/FOSTEX FE103
¥ 1,980 (1 piece, around 1972)
¥ 2,800 (1 piece, around 1976)
¥ 3,300 (1 piece, around 1992)
Commentary
This is a 10 cm cone type full range unit from the FE series that makes use of the tradition of Fostex.
It has been sold for a very long time.
Roll edge and heat-resistant and efficient voice coil are used to realize low distortion even at full power.
Until around 70's, there were 2 kinds of variations of 16 Ω and 8 Ω, but after that, only 8 Ω was produced continuously.
When it was released, FE 103 ∑ was also available as an enhanced magnetic circuit type of FE 103.
* It seems that the specification of FE-103 has been changed several times during the sales period.
The FE 103 from the beginning to the early 70's was designed with the bolt exposed from the back of the magnet. After that, the magnet part and the label were changed, and after that, it was changed to Fostex label.
The earliest catalogs had different recommended enclosure designs.
-
* Above is the frequency characteristics of the earliest period (50 cm on the axis).
Efficiency differs greatly due to differences in measurement methods.
Model Rating
Method | Cone type full range speaker |
Aperture | 10cm |
Impedance | 8 Ω 16 Ω (around 1976) |
Lowest resonance frequency | 80Hz |
Playback frequency band | Fo ~ 18 kHz |
Output sound pressure level | 96dB/W/50cm (around 1968) 88dB/W/m (around 1972) 89dB/W/m (around 1976) |
Input | 15W(Mus.) 10W (maximum, 1968 catalog) |
Mo | 1.85g (around 1968) 2.7g |
Qo | 0.3 (around 1968) 0.35 |
Effective vibration radius (a) | 4.0cm |
Magnet weight | 193g |
Magnetic flux density | 10,000 gauss (circa 1968) 11,000gauss |
Total flux | 29,000 maxwell (around 1968) |
Standard enclosure method | Bass Reflex Type (6 Liters) 8.5 liters (around 1976) |
Gross weight | 630g |
Enclosure dimensions, top from 60 s and bottom from 90 s.
-
Late FE-103
-
Initial detailed dimension drawing