FOSTEX SV20

Commentary

A 2-way speaker system developed for use in AV applications.

The magnetic circuit uses a repulse type magnetic circuit with very little magnetic leakage to the outside.
This eliminates the impact on cathode ray tubes and other products.

A 13 cm cone type woofer is installed in the low range.
A multi-layer cone unique to Fostex is used for the diaphragm.

A ring-type RP tweeter is installed in the high range.

The enclosure has a unique curvilinear form. It is made of extra-thick special foam molding with a thickness of 5 cm using advanced molding technology. There is no noise or insufficient strength that can be seen with resin molded products.
A bass reflex system is adopted for the internal structure, and a special rubber damper with high anti-vibration ability is installed in the rear part to enable voluminous low sound reproduction.

It comes with a stopper for horizontal installation and can be used as a center speaker.

There was a special speaker stand SF450 sold separately.
This stand can be set to a height of approximately 45 cm from the floor or can be fixed by swinging the speaker from side to side.

Model Rating

Method	2-way, 2-speaker, bass reflex system, setting-free type, magnetic protection design
Units Used	For low band : 13 cm cone type For High Frequency : Ring Type
Impedance	8 Ω
Frequency characteristic	90 Hz to 20 kHz
Crossover frequency	5kHz
Output sound pressure level	86dB/W/m
Input	80W(Mus.)
External dimensions	Width 162x Height 300x Depth 164 mm
Weight	3.4kg
Attachment	Horizontal Stopper
Sold Separately	Speaker Stand SF450 (1 unit, ¥ 6,000)